Jumla Mini Hannun Laser Engraver Fiber Laser Marking Machine
Siffofin
1. Yana ɗaukar ƙirar ƙirar tsarin gabaɗaya, wanda yake da ƙarfi da kwanciyar hankali, tare da aikin girgizar ƙasa mai ƙarfi, ƙaramin girman, mai sauƙi da kyakkyawa.
2. Tsarin ja-gorar ja-gorar haske ta atomatik ta atomatik, matsayi mai sauƙi da daidaitaccen matsayi.
3. The katako ingancin ne mai kyau, da asali yanayin (TEMOO) fitarwa, mayar da hankali tabo diamita ne 10um, da kuma divergence kwana ne 1/4 na semiconductor famfo Laser, musamman dace da daidaici da lafiya alama.
4. Canjin canjin lantarki na lantarki ya kai 30%, kuma baturin lithium da aka gina zai iya aiki ci gaba har tsawon sa'o'i 8.
5. Ƙunƙarar zafi na kayan aiki yana da ƙarfi, kuma ainihin ɓangarensa, Laser fiber, baya buƙatar babban tsarin sanyaya ruwa, amma kawai yana buƙatar sauƙi mai sanyaya iska.
6. Laser baya buƙatar wani kulawa, kuma baya buƙatar daidaita hanyar gani ko tsaftace ruwan tabarau.
7. Yin amfani da diode laser azaman tushen famfo, matsakaicin rayuwar aikinsa na iya kaiwa sama da sa'o'i 100,000.
8. Galvanometer mai saurin-sauri, ƙananan girman, ƙarami da ƙarfi, daidaiton matsayi mai girma, saurin sarrafawa shine sau 2-3 na na'urori masu alamar Laser na gargajiya.
9. An karɓi tsarin kula da taɓawa, ƙirar aiki yana da kyau kuma mai sauƙi, aikin yana da ƙarfi, cikakkun bayanai dalla-dalla, aikin yana da sauƙi, kuma yana goyan bayan coding ta atomatik.Yana iya buga serial lambobi, batch lambobi, kwanan wata, barcodes, QR codes, atomatik tsalle lambobin da sauran graphics da rubutu.
10. Ya dace da kowane nau'in yanayin aiki, kuma yana iya aiki akai-akai har ma a cikin yanayi mara kyau kamar girgiza, girgiza, zazzabi mai zafi ko ƙura.
Aikace-aikace
1. Software yana da ayyuka na daidaitawa da zane-zane, samfoti na haske mai ja, juyawa da bugu da tsaftace baki, watsawa na waje da bayanan karantawa, da dai sauransu.
2. Software yana dacewa da fitarwar fayiloli ta Coreldraw, CAD, Photoshop da sauran software.
3. Taimakawa PLT, PCX, DXF, BMP da sauran fayiloli, kuma kai tsaye amfani da rubutun SHX da TTF.
4. Goyan bayan lambar ƙididdigewa ta atomatik, lambar serial, lambar tsari, kwanan wata, lambar barcode, lambar girma biyu, lambar tsalle ta atomatik, da sauransu.
5. Za'a iya tsara zane-zane, haruffan Sinanci, lambobi, haruffan Ingilishi, da sauransu.
6. Za'a iya saita lambar serial ta atomatik, kwanan wata da lokaci bisa ga bukatun samarwa.
7. Red haske preview, za ka iya amfani da ja-haske preview aiki don nuna buga abun ciki a kan workpiece a gaba, abin da ka gani shi ne abin da ka samu.
Siga
| Ƙarfin Laser | 20W |
| Tsawon tsayi | 1064nm ku |
| ingancin katako | 2 (M2) |
| Nau'in Laser | Pulsed ko CW |
| Lokacin rayuwa | ：100000 hours |
| Sanyi | Hadaddiyar sanyaya iska |
| Lokacin aiki | 8 hours yana ci gaba da aiki |
| Yanayin aiki | Zazzabi: -5°C–45°C, Dangi zafi:80% |
| Girma | Shugaban alamar: 150 * 120 * 248mm, Harsashi Machine: 285mm * 168mm * 245 mm (L * W * H) |
| Nauyi | 8kg |
| Zurfin alamar alama | ≤0.5mm |
| Saurin yin alama | ≤7000mm/s |
| Wurin yin alama | 70*70mm |
| Mafi ƙarancin hali | 0.15mm |
| Mafi ƙarancin layi | 0.012 mm |
| Maimaituwa | ± 0.002 |
